1.1.3 - Battery Driven Hydraulic High Pressure Pump - KW Hydraulic - Tools and Pumps

Go to content

1.1.3 - Battery Driven Hydraulic High Pressure Pump

PRODUCTS > 1 - HYDRAULIC PUMPS and POWER UNITS
HYDRA FUTURE BHP-SE-STANDARD - Battery Driven Hydraulic Pump 60 Volt
1 - Hydraulic pumps
With solenoid valves and electric remote control for single acting tools
Electric disk engine: 60 Volt / max. 1500 Watt
Battery: 60 V / 2,1 Ah / 125 Wh
Pressure sensor / digital gauge / pressure demand control /
CEJN couplers "115" / 1,4 Liter oil reservoir
Maximum operating pressure: 100-850 bar
Delivery: Pump with integral battery, charger, remote control, 3 meter hydraulic hose with couplers, carrying bag

BHP-SE - Battery Driven Hydraulic Pump

For use with internally fitted battery or mains operation 110 V-230V/50-60Hz up to 850bar
Automatic recognition of pressure demand (DBE) with cut off function when required pressure is reached (20-850 bar). Useable for all tools with an oil demand up to 1000mm²
Maximum output oil pressure can be preset by software to suit customers requirements, e.g. 700 bar
Optional inching function for interruptible tool feed or direct control
Energy saving mode – Pump switches off 10 minutes after last cycle or at low battery
Battery safety function – Pump switch off by low battery, controlled by electronic system
Automatic cut off when no load after working cycle (i.e. punching tools in order to protect dies and save energy)
Rugged housing – (control buttons, coupling devices and display are well prodected)
Li-Ion Battery 60V/2,6Ah – The capacity of the battery is sufficient for one working day of electric installation work and service works
stronger battery with 7,8 Ah available for intensive montage working and using
1,5 kW disk engine, optional 4 kW disk engine
Soft start off the engine reduce the flip of the unit.
Separate quick charger operated off 110-230VAC/50-60Hz – in 30 min. the battery is charged to 80%
Magnetic holding strip on back of remote hand switch for convenient positioning
Wireless remote control available
Foot switch is optional available
This pump can be used together with wireless remote control for life line cutting units up to 60.000 volt.
Immediate availability
3.094,00 €(VAT incl.)
Add
HYDRA FUTURE BHP-SE-POWER - Battery Driven Hydraulic Pump 60 Volt
1 - Hydraulic pumps
With solenoid valves and electric remote control for single acting tools
Electric disk engine: 60 Volt / max. 1500 Watt
Battery: 60 V / 4,2 Ah / 250 Wh
Pressure sensor / digital gauge / pressure demand control /
CEJN couplers "115" / 1,4 Liter oil reservoir
Maximum operating pressure: 100-850 bar
Delivery: Pump with integral battery, charger, remote control, 3 meter hydraulic hose with couplers, carrying bag

BHP-SE - Battery Driven Hydraulic Pump

For use with internally fitted battery or mains operation 110 V-230V/50-60Hz up to 850bar
Automatic recognition of pressure demand (DBE) with cut off function when required pressure is reached (20-850 bar). Useable for all tools with an oil demand up to 1000mm²
Maximum output oil pressure can be preset by software to suit customers requirements, e.g. 700 bar
Optional inching function for interruptible tool feed or direct control
Energy saving mode – Pump switches off 10 minutes after last cycle or at low battery
Battery safety function – Pump switch off by low battery, controlled by electronic system
Automatic cut off when no load after working cycle (i.e. punching tools in order to protect dies and save energy)
Rugged housing – (control buttons, coupling devices and display are well prodected)
Li-Ion Battery 60V/2,6Ah – The capacity of the battery is sufficient for one working day of electric installation work and service works
stronger battery with 7,8 Ah available for intensive montage working and using
1,5 kW disk engine, optional 4 kW disk engine
Soft start off the engine reduce the flip of the unit.
Separate quick charger operated off 110-230VAC/50-60Hz – in 30 min. the battery is charged to 80%
Magnetic holding strip on back of remote hand switch for convenient positioning
Wireless remote control available
Foot switch is optional available
This pump can be used together with wireless remote control for life line cutting units up to 60.000 volt.
Immediate availability
3.213,00 €(VAT incl.)
Add
HYDRA FUTURE BHP-SE-HEAVY DUTY - Battery Driven Hydraulic Pump 60 Volt
1 - Hydraulic pumps
With solenoid valves and electric remote control for single acting tools
Electric disk engine: 60 Volt / max. 4000 Watt
Battery: 60 V / 4,2 Ah / 250 Wh
Pressure sensor / digital gauge / pressure demand control /
CEJN couplers "115" / 1,4 Liter oil reservoir
Maximum operating pressure: 100-850 bar
Delivery: Pump with integral battery, charger, remote control, 3 meter hydraulic hose with couplers, carrying bag

BHP-SE - Battery Driven Hydraulic Pump

For use with internally fitted battery or mains operation 110 V-230V/50-60Hz up to 850bar
Automatic recognition of pressure demand (DBE) with cut off function when required pressure is reached (20-850 bar). Useable for all tools with an oil demand up to 1000mm²
Maximum output oil pressure can be preset by software to suit customers requirements, e.g. 700 bar
Optional inching function for interruptible tool feed or direct control
Energy saving mode – Pump switches off 10 minutes after last cycle or at low battery
Battery safety function – Pump switch off by low battery, controlled by electronic system
Automatic cut off when no load after working cycle (i.e. punching tools in order to protect dies and save energy)
Rugged housing – (control buttons, coupling devices and display are well prodected)
Li-Ion Battery 60V/2,6Ah – The capacity of the battery is sufficient for one working day of electric installation work and service works
stronger battery with 7,8 Ah available for intensive montage working and using
1,5 kW disk engine, optional 4 kW disk engine
Soft start off the engine reduce the flip of the unit.
Separate quick charger operated off 110-230VAC/50-60Hz – in 30 min. the battery is charged to 80%
Magnetic holding strip on back of remote hand switch for convenient positioning
Wireless remote control available
Foot switch is optional available
This pump can be used together with wireless remote control for life line cutting units up to 60.000 volt.
Immediate availability
3.927,00 €(VAT incl.)
Add
TypeWorking
Pressure
Battery
Capacity
PowerOil Flow
LP / HP
Useable
Oil Volume
DimensionWeight
HYDRA FUTURE SE
STANDARD

20-850 bar2,1 Ah / 125 Wh1500 Watt1 L/min.1,2 L255x185x280 mm
7 kg
HYDRA FUTURE SE
POWER
20-850 bar4,2 Ah / 250 Wh1500 Watt1 L/min.1,2L255x185x280 mm7,5 kg
HYDRA FUTURE SE
HEAVY DUTY
20-850 bar
4,2 Ah / 250 Wh4000 Watt
1-3 L/min.
1,2 L255x185x280 mm
8 kg
HYDRA FUTURE SE
HEAVY DUTY PRO
20-850 bar
6,3 Ah / 375 Wh4000 Watt
3 L/min.
1,2 L255x185x280 mm
9 kg
HYDRA FUTURE BHP-SE

  • For use with internally fitted battery up to 850bar
  • Automatic recognition of pressure demand (DBE) with cut off function when required pressure is reached (20-850 bar). Useable for all tools with an oil demand up to 1000 mm³
  • Maximum output oil pressure can be preset by software to suit customers requirements, e.g. 700 bar
  • Optional inching function for interruptible tool feed or direct control
  • Energy saving mode – Pump switches off 10 minutes after last cycle or at low battery
  • Battery safety function – Pump switch off by low battery, controlled by electronic system
  • Automatic cut off when no load after working cycle (i.e. punching tools in order to protect dies and save energy)
  • Rugged housing – (control buttons, coupling devices and display are well prodected)
  • STANDARD: engine max. 1500 Watt / battery 60 V / 2,1Ah / 125 Ah – The capacity of the battery is sufficient for one working day of electric installation work and service works
    POWER: engine max. 1500 Watt / battery 60 V / 4,2 Ah / 250 Wh
    HEAVY DUTY: engine max. 4000 Watt / battery 60 V / 4,2 Ah / 250 Wh
    HEAVY DUTY PRO: engine max. 4000 Watt / battery 60 Volt / 6,3 Ah / 375 Wh
  • Separate quick charger operated off 110-230VAC/50-60Hz – in 30 min. the battery is charged to 80%
  • Magnetic holding strip on back of remote hand switch for convenient positioning
  • Wireless remote control available
  • Foot switch is optional available
  • This pump can be used for life line cutting units up to 60.000 Volt by using the wireless remote control
HYDRA FUTURE

HYDRA SOFT

  • Free programable software to adjust pressure, speed, time, valve function setting, and many other parameters.
  • Many different programs available.
  • You can select all programs or select the programs you want to use.
    Custom-build programs are easy realisable.
    Clearly operation.

  1. DBE ON (pressure demand detection) ON / TIPP-function ON / automatic return
  2. DBE ON / TIPP-function OUT / automatic return
  3. DBE OFF / TIPP-function ON / automatic return
  4. DBE OFF / TIPP-function OFF / automatic return
  5. DBE ON /  TIPP-function ON / automatic return / pressure adjustable per podentiometer from 100-850 bar
  6. DBE OFF / TIPP-function ON / automatic return / pressure adjustable per podentiometer from 100-850 bar
  7. DBE  ON / TIPP-function ON / automatic return / speed (spin of the engine) adjustable per potenziometer from 1000-3600 rpm
  8. DBE OFF / TIPP.function ON / automatic return / speed (spin of the engine) adjustable per potenziometer from 1000-3600 rpm
  9. DBE OFF / TIPP-function ON / NO automatic return
  10. DBE OFF / TIPP-function ON / NO automatic return / pressure adjustable per podentiometer from 100-850 bar
  11. DBE OFF / TIPP-function ON / NO automatic return / speed (spin of the engine) adjustable per potenziometer from 1000-3600 rpm
  12. ... many other programs can be realised.

HYDRA FUTURE SE - Battery hydraulic pump
BGH-700-D18V Battry Driven Hydraulic Pump 18 Volt
1 - Hydraulic pumps
- This pump operates in any position and is suitable due to their light weight and the supplied neck strap is ideal for mobile use
- Pressure switch off at maximum pressure is reached
- Mode: Cutting / Crimping
- Thermal fuse to prevent overheating
- State of charge control
- Optionally available solid transport case
- Shipment:
- BGH-700 Battery Electric Hydraulic Pump
- Remote control 2m
- DEWALT rechargeable battery 18 V / 5,0 Ah Li-Ion
- DEWALT Charger
Limited availability
2.975,00 €(VAT incl.)
Add
TypeWorking
Pressure
Battery
Capacity
PowerOil Flow
LP / HP
Useable
Oil Volume
DimensionWeight
BGH-700-D18V
700 bar
5 Ah400 Watt1,0 / 0,15 L/min.0,5 L330x160x250 mm7 kg
BGH-700 - Battery hydraulic pump
Back to content