8.4 Werkzeuge für flexible Schienen und Gewebebänder - KW Hydraulic - Tools and Pumps

Go to content

8.4 Werkzeuge für flexible Schienen und Gewebebänder

PRODUCTS > 8 - TOOLS for CONTROL and SWITCHGEAR CABINETS
Stromschienenbearbeitung, flexible Schienen
Stromschienenbearbeitung, flexible Schienen
Setting Tool

  • Simple stripping of lamellar rail, e. g. ERIFLEX® FLEXIBAR from 9 to 63 mm width.
  • Cuts all 4 sides of the insulation in one operation without damaging the copper.
  • Allows the deposition of short lengths
  • 4 fixing holes

Stromschienenbearbeitung, flexible Schienen
Bending Device

  • Fast bending without damaging the insulation
  • Integrated saw gauge
  • Bendable angle up to 120°.
  • Bending radius: 5 mm
  • Maximum capacity: 10x100x1 mm
Stromschienenbearbeitung, flexible Schienen
Drilling Jil

  • Several diameters, all hole spacings.
  • This gage enables the drilling of one or more holes with different diameters and different distances between the hole centres.
    Drilling jig inserts:
    - 6,5 mm (M6) / 8,5 mm (M8) / 10,5 mm (M10) / 12,5 mm (M12)
    - 5/16 "(1/4" Bolt) / 3/8 "(5/16" Bolt) / 17/32 "(7/16" Bolt) / 9/16 "(1/2" Bolt) / 17/32 "(7/16" Bolt) / 9/16 "(1/2" Bolt)

Stromschienenbearbeitung, flexible Schienen
Stromschienenbearbeitung, flexible Schienen
Cutting Device

  • cutting device
  • Cuts quickly and cleanly without deformation and burr
  • Cuts with insulation
  • Adjustable stop
  • Inexpensive
Stromschienenbearbeitung, flexible Schienen
Stromschienenbearbeitung, flexible Schienen
Twisting Tool

  • Unlimited possibilities for twisting and bending. Use together with the bending tool
Stromschienenbearbeitung, flexible Schienen
Pressing and Drilling Tool for flexible copper tapes

  • Drilling jig with adapted drill bit
  • For pressing and drilling of sleeves for fabric tapes
  • suitable for sleeves for flat fabric tapes made of hardened copper, tin-plated,
    sleeve dimensions 16x15 / 22x25 / 30x30 mm
  • Four fixtures available for screw M6 / M8 / M10 / M12 / M12
Back to content